skip to Main Content

75-00111 BC Sport Roll Cage for Early Ford Bronco


Product price
Additional options total:
Order total:


This is the new roll cage that we tested by rolling a Bronco three times, for a total of 6.5 rolls! View the video here.

The cage is made of .120 wall ASTM 1020 DOM tubing. Both the B and C pillar run from the halo down to the floor, across the floor, and up the other side. This gives the B and C pillar much more support, and allows them to be frame mounted. In fact, the rear body mounting bolts go through the C pillar tabs and rear body mounts just in front of the tail gate. The B pillar bolts to the frame through the body mounts behind the front seats. The B pillar has seat belt bungs installed.

As you can see, there is only one A pillar. It is mounted near the front center of the halo to support the front of the cage. The A pillar is easily removed, and can be stored when not needed. Making the A pillar removeable gets it out of the way until you need it, so you don’t lose your glovebox and E-brake pedal, and you don’t have to get your feet around it to get in or out when you don’t need it.

The roll cage must be shipped freight. We will contact you with the shipping costs. We will not process this order until you approve the freight charges. Due to freight regulation changes, all pallets need to be boxed, so we can no longer offer powder coated cages unless they are picked up by the customer.


Additional information

Weight 200 lbs
Dimensions 72 × 55 × 49 in
BC Broncos custom part?


You may also like…

Back To Top
×Close search