27-00021 Moser Rear Axles for Early Bronco * CUSTOMER MEASURMENTS
Moser axles are the Best on the market using only the best materials. These axles are 100% US MADE
Offered in 28, 31, 35, 40 spline and big or *small bearing (*28 or 31 only) with big bearings you can opt for the tapered roller bearings, however we do not recommend them due to the seal being pressed on before the bearing (if the seal fails you have to replace the bearing and seal) . The bearings and retainers are extra and not included, however if you order them with the axles they are pre installed. The length of the axles are set by your particular housing. You can order longer axles if you are upgrading your housing or increasing the width. In racing SCORE rules state you can go 4″ wider than stock.
Because Ford offered so many options of bearings, lengths and flanges, plus taking into account the PO (previous owner) may have changed something in the past. We need measurements from your old axles to guarantee proper fit.
To order axles you must provide the spline count. The overall length of the axle from the axle flange to the end of the splines. And the measurement from the outside of the flange to the start of the bearing on both axles. Please see the measurement info in the pictures.
This is not a stocking item it ships directly from the manufacturer usually within 2 days.