15-00153 Serpentine Kit for F150 Coyote for Early Bronco
Our serpentine kit will mount the power steering pump on the driver’s side, the alternator on the right side, and the A/C on the right side as well. This keeps everything on the correct side so you don’t have to cross hoses and wires from side to side. Also, this kit doesn’t require any modification to the frame. Just using the stock coyote alternator will require you to cut the frame at the track bar mount. It is a 2 belt system with 9 pulleys. It is a lot of stuff in a tight package. You will need to re-drill one hole in the timing cover to get the power steering tensioner to fit correctly. The kit comes with a template to make sure you drill in the correct place. It includes new 200 amp Alternator, power steering pump, new A/C compressor, 2 tensioners,2 belts, all pulleys, all brackets, and hardware. All you use from the motor are the crank pulley, water pump, and pulley. On some F150s you may need to change the crank pulley.
If using a 2017 and earlier F150 engine you will need to change your timing cover to #18-00120. It is included in this kit along with idler pulley and bolt.
This is our Coyote serpentine system with a new ungraded alternator . We had to increase the pricing on this kit, but the new upgraded alternator is a 200 amp Powermaster alternator MADE IN THE USA.