dry fit trans adapter install
dry fitting trans adapter on a 302 in the show room
mating the trans to the engine
mating the 6r80 trans to the 302 engine in the show room
crank bolt hole alignment
flexplate and crank spacer test 6r80 to small block adaptor
first parts removed
Get that old junk out of there so you can install the good stuff
spacer on crank test fit
spacer on crank test fit for 6r80 to small block
inspect crank and back of block
inspect crank and back of block it will save you time and give you peace of mind. I would recommend to take a picture before you install the flexplate.
bolt locations
Bell housing bolt locations for the 6r80 to the 302
test fit if you have custom parts
6R80 to small block x-member mounting
6R80 to small block x-member mounting mounting the D20 adaptor
moving x-member back
moving x-member back for 6r80 to small block adaptor
Installing the 6r80adapter on the small block
Installing the 6r80adapter on the small block with engine separator plate
flexplate lined up
flexplate lined up using the marks we made
remove the old
remove the old getting ready for the 6r80 transmission
x-member test in factory spot
moving x-member back
crank spacer to flexplate test short
crank spacer to flexplate test short
Reversible mount
Reversible mount for 6R80 to D20 adaptor mount
crank spacer test
crank spacer test for 6r80 to small block adaptor
6R80 t case adaptor mounting
6R80 t case adaptor mounting
6R80 to D20 adaptor
Installing the 6R80 to D20 adaptor onto the tcase once you have installed the 13 roller bearings.
D20 to 6R80 adaptor mounting bolts
D20 to 6R80 adaptor mounting bolts
Bronco D20 t case roller bearings
Showing you how to install the 13 roller bearings so you can install the transmission adapter.
6r80 and small block with adaptor
More info on what engine and transmission we are using
6R80 to small block adaptor parts
Intro to the 6R80 to small block adaptor kit parts
fuel pump mod
We came up with a simple way to prevent the pump from sucking up against the bottom of the tank and also to prevent the vibration isolator from falling out. the original filter socks would prevent this because it had a nylon anti-collapse backbone inside of the filter but lots of the new type filters don't have that feature.
BC Broncos rear disc brake caliper adjustment
Here is how you adjust the rear calipers, with ebrakes.
