75-00123 Windshield Frame Stiffeners, 10″ Long, for Early Ford Bronco
$59.99
Description
SOLD IN SETS OF 2
Without stiffeners, the only thing that keeps your windshield frame in position (and paint on your doors) is the thin rubber that glues to the windshield frame. There are many different roll cage designs available, so select a stiffener that will allow you to adjust your windshield-to-door gap and secure your windshield frame.
These stiffeners are 10″ long center to center with about 1.25″ of adjustment. One end bolts to the stock windshield frame and the other end bolts to a provided, weld on tab. The tab is welded to the front of the roll bar. Ball studs make them flexible, and they are adjustable and lock with 2 wrenches. WE ONLY USE FK HEIMS, NOT “CHEAP JUNK” HEIMS.
The rods are intentionally made with a small diameter, so you cannot use them as a handle to pull yourself into the Bronco or to brace yourself in the event of a rollover. (Using larger rods might encourage someone to use their stiffeners in this manner, which could lead to severe injury or even loss of your digits.)
MADE IN THE USA
Additional information
Weight | 4.00 lbs |
---|---|
Dimensions | 10 × 10 × 2 in |
BC Broncos custom part? | |
Vendor |