11-60364 6 Pc Stainless Steel EFI Flex Line Kit Rear Inlet with 100Psi G for Early Ford Bronco
This kit was designed to work with our steel hard line kit, New fuel tank and Ford EFI with the pressure and return on the Driver side fuel rail. Made with reuseable A/N fittings and Braided Stainless Steel fuel hose, the fittings are already installed on the lines. Starting at the fuel tank just thread the line on the fuel tank fitting route it over the crossmember and connect the return to the steel fuel line, on the pressure side just push the quick connector on to the filter. For the front lines thread the flex line onto the hard line and connect the spring lock connectors to the fuel rails it is that easy. With this kit on the pressure side click on the spring lock on the fuel rail and thread the pressure gauge fitting on then thread the fuel line onto that fitting. Hard lines not included.
|Dimensions||11 × 9 × 7 in|