skip to Main Content

17-00125 Gen 3 5.0L Coyote 460 HP Mustang Manual Crate Engine

$9,750.00

Part Number: 17-00125 Tags: ,

Description

*Must change the oil pan if using a 4.5″ or lower lift

The Ford Performance all-aluminum 2018-2019 5.0L Coyote crate engine is a modern 5.0L 32-valve DOHC V-8 that uses advanced features like Direct and Port Fuel Injection, Twin Independent Variable Camshaft Timing (Ti-VCT), high-flow cylinder heads, and heightened compression ratio to deliver 460 horsepower @ 7,000 rpm and 420 ft.-lb.+ of torque @ 4,600 rpm (with premium fuel). The lightweight  plasma transferred wire arc spray aluminum cylinder block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, optimized oil drainback and windage control to improve high-rpm performance.

  • 460 Horsepower @ 7,000 rpm
  • 420 ft.-lb.+ of Torque @ 4,600 rpm
  • 12.0:1 Compression ratio
  • Hypereutectic aluminum pistons
  • Sintered steel connecting rods as used on BOSS302 Mustang
  • Forged steel crankshaft
  • Aluminum block which features plasma transferred wire arc spray weld liner coating
  • Longer, 12 mm head bolts for higher clamp load
  • Plastic 10 qt capacity oil pan (Must change pan if using 4.5” and lower lift”)
  • Tuned composite intake manifold provides efficient air delivery and weight savings
  • 80 mm single bore “drive by wire”, electronic throttle body with variable runner control
  • High-flow aluminum cylinder heads, dual overhead camshaft (DOHC), four valves per cylinder, variable intake and exhaust camshaft timing
  • Includes manual transmission engine harness and dual mass flywheel, for engine equipped with automatic transmission engine harness and flex plate, see 17-00126
Back To Top
×Close search
Search